Car Locks Repair
A car locksmith is usually able to work with both electric and manual door locks. Manual lock issues are more frequent, but they are still frustrating.
A good way to prevent this is to apply a lubricant for the door lock during the winter months, like WD-40. It will displace moisture and prevent it from freezing within the keyhole.
Door Lock Cylinder Replacement
If you lost your car keys or suspect that someone has, it's a good idea to replace your door lock cylinders immediately. This will ensure that you're the only person who can open your car, and keep burglars and other unauthorised people out of it. Unfortunately replacing a car's door cylinder is quite difficult, as it requires at a minimum disassembly of the interior door panel in the majority of instances. This isn't a task that most people will want to attempt by themselves, as it could be extremely dangerous in the wrong way.
First, the lock cylinder must be removed from the handle. To accomplish this, you need to locate the screw on the edge of the housing for the lock cylinder (usually in the upper right-hand corner). It may be hidden beneath plastic pieces or even barely visible. If you can't locate it, remove any trim panels blocking your view. Then, use a pick, awl, or small screwdriver to release the lock cylinder retaining tab and take the cylinder out of the housing.
Once the cylinder has been removed, there are a few things to do to prepare it to use. The keyway should be cleaned to get rid of dirt and grease. The cylinder must be lubricated so it is not stuck in the lock. This can be done by using brake cleaner. It will clean and lubricate the parts of the lock cylinder. After cleaning the cylinder you can take off the 10mm bolt that holds the handle to the housing of the cylinder with an screwdriver.
You can then put in the new cylinder and use it with your original key. It is recommended to purchase an cylinder that is the same model and brand that you already have. This will ensure that it fits properly and will provide a secure seal. Test the door after installation to ensure that the lock is working properly and is closed securely.
Door Lock Cylinder Repair
The lock cylinder is the component of your car door the key fits into to unlock or secure the door. If the key is stuck inside the lock or you are having trouble turning it, this could indicate that the door cylinder needs to be replaced.
It's usually next to the door handle, although some cars have them hidden behind the plastic piece. When you turn the key, the pins in the cylinder align with cuts on the key head, allowing you move the lock and unlock the car door. If you have a cylinder that is mounted on the surface take off the faceplate on the door handle. Unscrew one or more cylinder setscrews.
Once the screw is loose then you can rotate the cylinder until you can remove it out of the door. Put the screws in a bag, or a secure place to replace them later. Next, use the key and place it inside the lock to see if the tumblers/pins are moving freely or getting stuck. If you hear or feel an erupting sound or if the cylinder is seized and needs to be replaced, it's best to replace it.
You can purchase new cylinders at any auto parts shop, but you will be required to know your car's model and make before you shop. You can also speak with an expert locksmith to repair the door cylinder. They will be able match the new lock to your current key, meaning you can use your original lock.
The most common issue with a car lock cylinder is that it won't turn when you try to use your key. This can be caused by dirt or corrosion that has accumulated in the cylinder, preventing it from circulating freely. It is simple to fix this issue by lubricating the mechanism. You can make use of brake cleaner or white grease to get rid of any rust or grime. This method will only work on a cylinder that has become jammed. It can't solve any other problems.
Door Lock Repair
Rust, dirt and other debris can cause the door lock to become jammed. You can often fix this by spraying the mechanism with a lubricant such as WD-40. This will unclog the mechanism and prevent it from repeating itself in the future. If you cannot turn the lock, try wriggling the rod with needle-nosed pliers. If this doesn't work you, you must contact locksmiths to replace the lock.
The issue of misalignment is a common one with door locks. This makes the lock difficult to use and is a security concern because it makes the door more difficult to get around in a burglary attempt. Locksmiths should be contacted to correct the issue, but you can often fix the issue yourself.
To fix this problem, start by examining the door lock to see the cause of why it does not operate properly. If the issue is caused by an incorrectly aligned strike plate or deadbolt tighten the screws that hold these items. Then, reposition the strike plate and bolt to ensure that they are aligned correctly with the door frame.
A small amount of graphite can be used to resolve the issue when the key will not insert or turn. You can apply graphite by squeeze the tube or dusting an old key. Insert the key into the lock, and then turn it for a few times to activate the graphite into the mechanism. If this doesn't work, you may remove the door knob and inspect the spindle. it may be worn out.
The procedure to remove the door handle or the door panel varies from vehicle to car, but the general procedure is identical. Once you have removed the panel, locate all of the set screws that hold the lock cylinder. These screws are located on either the inside of the handle or in the middle of the panel, depending on the model. Remove the screws and carefully align the cylinder with the keyway. There is a risk of damaging the components if tightening too tightly the screws.
Door Lock Replacement
Replace your lock if it's worn out or looks old. It will give you a fresh appearance. It's a relatively simple process that can be done at home with only a few simple steps. Take the time to check the latch and deadbolt settings on your door. You'll need make sure that your new locks have been set correctly.
Remove the screws that hold the knob plate to the door. Then pull G28 Car Keys and latch off. If the interior plate has no screws and is purely decorative, gently pry it off with a screwdriver. The plate could be held in by pins or snap off the edge. After the plate is removed, you can easily take off the dead bolt and latch, and place them in a safe place.
Now is the time to put the new plates for your lock in place. The interior and exterior plates should be lined up with the deadbolt holes on the door jamb. The long spindle made of metal of the lock cylinder needs to pass through both holes. Once you have the plates positioned, hand-thread screws into the screw holes to secure them together loosely. If the plate isn't equipped with screw holes, then you can simply slide it over the latch.
When putting the lock back together, be sure not to reuse the previous screws (unless you have the identical color). Use the screws included in the new lock kit instead. If you don't have the right size screws, visit a hardware or home improvement shop and purchase some that match the hardware on your new door lock.
Be sure that your new latch plates and deadbolt are the same size as the original ones, and that they are aligned over the latch hole of the door jamb. After everything is in place you can push the remaining screws to tighten them securely. You can now check the latch and deadbolt with your key. If the key isn't turning, it's time to call locksmith.